Connect the AirStation to the PC and power both devices on. Login To Your Router. Enter the AirStation's IP address in the address field, then press the [Enter] key. Note: If the AirStation is in bridge mode and there is no DHCP connected to PC, assign a static IP address to PC. Here is a complete list of Buffalo router passwords and usernames. *** Because the network addresses of both the Internet port (WAN port) and the LAN port are the same, it is not possible to establish communication. These instructions are for the Buffalo Airstation WZR-1750DHP / WZR-1166DHP. Click on the widget to the right of "IP Address".

* Never unplug the AC adapter while the Buffalo LED is blinking continuously. 1. Buffalo AirStation Wireless-G MIMO Performance Router WHR-HP-G54 This site also contains information about the preconfigured Wi-Fi settings of the device. If you do not know the AirStation's IP address, check the setup card included in your AirStation's package, or use AirStation Configuration Tool to display it. Here you can find the default IP address and the predefined access data for the user interface of the WHR-HP-G54 Wireless Cable/DSL router of Buffalo. Find Buffalo router passwords and usernames using this router password list for Buffalo routers. Links Don't Work - If they time out, or take more than a few seconds to load, you must have the wrong IP address. Try one of these IP addresses: 192.168.1.1 192.168.0.1 192.168.2.1 192.168.1.254 192.168.0.50 Find the default login, username, password, and ip address for your Buffalo WLAE-AG300N router. The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server. I am having problems configuring a Buffalo AirStation wireless router as a network access point. Find the default login, username, password, and ip address for your BUFFALO BUFFALO router. You will need to know then when you get a new router, or when you reset your router. Admin Login Admin Login 2.

Home; Buffalo; WHR-HP-G54; Default settings of the Buffalo WHR-HP-G54.
You will need to know then when you get a new router, or when you reset your router.

Find the default login, username, password, and ip address for your Buffalo AirStation WZR-450 router. Home; Buffalo; WZR-HP-G450H; Default settings of the Buffalo WZR-HP-G450H. The choice is FAT32 for up to 32Gb, then XFS (a linux file system) for drives larger than 32Gb. Don't forget to change your computer's IP address back when you've finished configuring the Ethernet Converter. This site also contains information about the preconfigured Wi-Fi settings of the device. You will need to know then when you get a new router, or when you reset your router. My basic problem is that I cannot convince the device to have a DHCP-assigned IP address. The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server (this is the default).
Even if, on the main Setup page, I set the 'WAN Connection Type' to 'Automatic Configuration - … 2. Change the LAN-side IP address of the AirStation. Launch a web browser and enter the AirStation's IP address into the address bar. One issue the Buffalo AirStation has is it cannot mount NTFS partitions, the standard for Windows since the days of XP. Getting Ready The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server (this is the default). Home; Buffalo; WHR-HP-G54; Default settings of the Buffalo WHR-HP-G54. ... etc. Power down the Cable or DSL modem and the computer which will be used to configure the AirStation router. Find the default login, username, password, and ip address for your BUFFALO BUFFALO router.