The alloy has a dull appearance resulting from the high lead content. It is especially suitable where resistance to gasoline is required. This material is commonly known as terne and is used where ease of solderability and a degree of corrosion resistance are desirable. Terne plate was used for tinsmithed sheet metal goods, such as storage vessels,

Terne coating has been on the market since 1968, ‘terne’ referring to the application of an alloy containing lead and tin which gives steel the appearance of lead without the weight, being about equivalent in weight to Code 1 lead sheet. It is especially suitable where resistance to gasoline is required. Terne is traditionally an alloy of lead and tin, typically in a ratio of four-to-one, that is used as a coating in producing terneplate. Featuring: 99.99% Lead in a variety of forms, Pb-Base Babbitt and casting alloys for jewelry and ornamental products, 6% Antimonial Lead, Linotype Alloys, and Pb-Base Solders. steel plate coated with this alloy. Also called: terne metal. More recently, aluminum has been added to calcium-lead and calcium-tin-lead alloys as a stabilizer for calcium.

The composition of terne metal ranges from 50–50 mixtures of lead and tin to as low as 12 percent tin and 88 percent lead.
The low tin content made it cheaper than other tinplates. The composition of terne metal ranges from 50–50 mixtures of lead and tin to as low as 12 percent tin and 88 percent lead. Also called: terneplate. An alloy is a material made by melting one or more metals together with other elements. We've arranged the synonyms in length order so that they are easier to find. Some alloys are listed under more than one element, since the composition of the alloy may vary such that one element is present in a higher concentration than the others. Terne roofs can last a very long time. In recent years, lead has been replaced with zinc and is used in a ratio of 50/50. Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process: A 657-13: TFS: Tin Mill Products, Black Plate, Electrolytic Chromium-Coated, Single and Double Reduced: A 599-07: Tin Coated Sheet: Steel Sheet, Cold-Rolled, Tin Coated by Electrodeposition: A 623-11: Tin Mill Products: This material is commonly known as terne and is used where ease of solderability and a degree of corrosion resistance are desirable. This specification covers sheet steel in coils and cut lengths coated with lead-tin alloy (terne metal, see 3.2.3) by the hot-dip process. A lot of terne roofs are a good 100 years old. Terne Terne is produced by coating metals such as carbon steel and stainless steel with a specially formulated alloy containing zinc and tin to dramatically increase corrosion resistance. The terne alloy was in the ratio of 10-20% tin and the remainder lead. Lead has been commonly used for thousands of years because it is widespread, easy to extract and easy to work with since it is highly malleable as well as easy to smelt. Adding tin to lead or lead alloys increases hardness and strength, but lead-tin alloys are more commonly used for their good melting, casting, and wetting properties, as in type metals and solders. When terne roofs were first used in colonial times, it contained roughly 80% lead and 20% tin. Terneplate, steel sheet with a coating of terne metal, an alloy of lead and tin applied by dipping the steel in molten metal. Traditional chromium plating uses lead-tin or lead-antimony alloys as the anode material although coated passive metal anodes (e.g. Terne plate was used for tinsmithed sheet metal goods, such as storage vessels, jugs and funnels, particularly for industrial use with flammable liquids.

(tɜːn ) noun. Synonyms, crossword answers and other related words for ALLOY OF TIN AND LEAD [terne] We hope that the following list of synonyms for the word terne will help you to finish your crossword today.